Perancangan Sistem Suspensi Dan Analisis Pegas Sepeda Motor Listrik Phb Menggunakan Finite Elemen Metode (FEM)

Sigit Setijo Budi, Firman Lukman Sanjaya, Fitri Ayu

Abstract


Currently, motorcycles in general and especially electric motorcycles, are equipped with various technologies, one of which is a suspension system. Electric motorcycle suspension has advantages, one of which is the damping of the rear suspension and has a suspension that is comfortable for daily mobility and tends to be soft when passing through damaged roads. The purpose of this study was to determine the load of the suspension using the finite element method. In this study, the springs received loads of 60kg, 80kg, 100kg and 120kg. From the results of this study, ST 37 suspension has better performance compared to AISI 1020.


Keywords


force, suspension, CAD

Full Text:

PDF

References


B. Nainggolan, F. Inaswara, G. Pratiwi, and H. Ramadhan, Rancang Bangun Sepeda Listrik Menggunakan Panel Surya Sebagai Pengisi Baterai, Politeknologi, vol. 15, no. 3, pp. 263272, 2016.

I. A. Nurdani, Studi Perancangan Pembangkit Listrik Tenaga Surya Sistem Hybrid Kapasitas 1230Wp Pada Sma Negeri 3 Surakarta Ditinjau Dari Teknis Dan Program Studi Sarjana Semarang Agustus 2021 Bab I, 2021.

S. S. Budi, A. Suprihadi, A. Makhrojan, R. Ismail, and J. Jamari, The effect of linear spring number at side load of McPherson suspension in electric city car, AIP Conf. Proc., vol. 1788, 2017, doi: 10.1063/1.4968329.

A. Pranata, A. M. Siregar, B. Dharma, W. S. Damanik, and A. R. Nasution, Mamfaatkan Limbah Skrap Aluminium Untuk Knalpot Sepeda Motor Vega ZR Tahun 2011 Guna Mengurangi Polusi Udara, J. Rekayasa Mater. Manufaktur dan Energi, vol. 4, no. 2, pp. 160168, 2021.

J. Reimpell, Automotive Chasis, in second edition, 2001.

K. V. Kumar and R. Rudrabhiramu, Design and Analysis of Helical Springs in Two Wheeler Suspension System, Int. J. Res. Adv. Eng. Technol., vol. 5, no. 2, pp. 128137, 2015.

Dassault Systmes launches new SOLIDWORKS app, Reinf. Plast., vol. 59, no. 3, p. 125, 2015, doi: 10.1016/j.repl.2015.02.041.

S. Cho, H. Yeon, H. Kim, and C. W. Kim, Design of end coil angular position and centerline shape of C-type side load coil spring for reducing side load of MacPherson strut suspension, J. Mech. Sci. Technol., vol. 35, no. 3, pp. 11531160, 2021, doi: 10.1007/s12206-021-0228-6.

S. K and D. G, Design and Material Analysis of a Suspension System in Scooter by using Finite Element Analysis Method, Int. Res. J. Multidiscip. Technovation, pp. 2537, 2019, doi: 10.34256/irjmt1914.

A. R. Nasution and E. Widodo, Numerical Analysis of Low Carbon Steel Tensile Strength Using Software ( SolidWorks ), vol. 7, no. 1, pp. 711, 2022.

Siddharth, D. Yadav, and S. Lata, Design development and analysis of cylindrical spring with variable pitch for two wheelers, Mater. Today Proc., vol. 47, pp. 31053111, 2021, doi: 10.1016/j.matpr.2021.06.130.

H. Affandi, Analisis Numerik Kekuatan Puntir Baja Karbon Rendah Menggunakan Software ( Solidworks ), vol. 6, no. 2, 2021.

J. Liu, D. J. Zhuang, F. Yu, and L. M. Lou, Optimized design for a MacPherson strut suspension with side load springs, Int. J. Automot. Technol., vol. 9, no. 1, pp. 2935, 2008, doi: 10.1007/s12239-008-0004-y.




DOI: https://doi.org/10.30596/rmme.v5i1.10261

Refbacks

  • There are currently no refbacks.


Creative Commons License

 This work is licensed under a Creative Commons Attribution 3.0 License

Jurnal Rekayasa Material, Manufaktur dan Energi  is abstracting & indexing in the following databases: 

 

Creative Commons License

This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

Statcounter View My Stats RMME