Analisis Pengaruh Berat Roller Standard Dan Racing Pada Sistem Cvt Terhadap Rpm Sepeda Motor Honda Beat Pgm-Fi Tahun 2015

Amin Nur Akhmadi, Mukhamad Khumaidi Usman

Abstract


Currently, automotive products, especially two wheels (motorbikes), are equipped with an automatic transmission system. The type of automatic transmission used is CVT (Continously Variable Transmission). A roller is a material that is composed of Teflon as the outer surface and copper or aluminum as the inner layer. The function of the roller is to press the inner wall of the primary pulley during high rotation. RPM (Revolution Per Minute) is the number of rounds done in one minute. The purpose of this study is to determine the results of RPM on the effect of roller use and to determine the comparison of the effect of using a weight variation of a 13 gram (standard) roller and a 10 gram (racing) roller on the RPM of a 2015 Honda Beat FI motorcycle. 4 steps. The research method used is an experimental method, namely by starting the engine and holding the throttle at 1400-1500 RPM after stabilizing then the throttle is rotated spontaneously up to 9000-9500 RPM. The results of this study can be concluded that the 10 gram roller on the primary and secondary pulleys only get good acceleration and RPM at low rotation speeds. Whereas at high rotational speed the RPM acceleration is less than optimal.


Keywords


CVT; Roller Variation; RPM; Primary and Secondary Pulley

Full Text:

PDF

References


Jalius Jama, (2008). Teknik Sepeda Motor Jilid. Direktorat Pembinaan Sekolah Menengah Kejuruan: Departemen Pendidikan Nasional.

Kohli, (2013). Sistem Kopling CVT dan Roda Penggerak Honda Vario Universitas Negeri Semarang. Program Diploma Teknik Mesin: Tugas Akhir Tidak Diterbitkan.

Nursyahera Apriana, (2016). Sistem Transmisi Otomatis CVT Sepeda Motor Sekolah Tinggi Teknik Wiworotomo Purwokerto. Program Diploma Teknik Mesin: Laporan Tidak Diterbitkan.

Solikin, (2005). Teknik Sepeda Motor, Universitas Negeri Yogyakarta.

Wikipedia, (2017). Gambar Motor Honda Beat PGM-FI Tahun 2013. https://id.m.wikipedia.org, di download pada tanggal 23 April 2018 20:13

Wiratmaja.2010.PerbedaanPerformaMotor Berbahan Bakar Premium 88 danMotorBerbahanbakarPertamax92.Semarang: Universitas NegeriSemarang.

Jalius Jama, dkk. 2008. Teknik Sepeda Motor Jilid2. Jakarta : Direktorat Pembinaan Sekolah Menengah Kejuruan.

Yamin, Mohamad, dkk. (2011). Analisa Dan Pengujian Roller Pada Mesin Gokart Matic. Diperoleh 07 Februari 2012 dari

http://www.gunadarma.ac.id/library/articles/graduate/industrialtechnology/2010/Artikel_20403008.pdf

Warju.(2008).Teknik Mesin Gelar Automotive Short Training. Diperoleh 26 Februari 2012 dari http://ft-unesa.org/?ft_unesa=berita⊂=detil&id=40




DOI: http://dx.doi.org/10.30596%2Frmme.v4i1.6692

Refbacks

  • There are currently no refbacks.


Creative Commons License
This work is licensed under a Creative Commons Attribution 3.0 License.

Jurnal Rekayasa Material, Manufaktur dan Energi  is abstracting & indexing in the following databases: 

  
   

Creative Commons License

This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

View My Stats RMME