Optimization of Three-Phase Load Balancing to Improve the Efficiency and Reliability of Power Transformers at the Tanjung Morawa Substation

Arnold Fernando Sinurat, Moranain Mungkin

Abstract


Three-phase load imbalance in power transformers is one of the main problems that can reduce efficiency, increase power losses, accelerate the increase in winding temperature, and reduce the life of transformer insulation. This condition often occurs in distribution systems due to uneven load growth between phases. This study aims to optimize three-phase load balancing to improve the efficiency and reliability of power transformers at the Tanjung Morawa Substation. The research method uses a quantitative approach based on transformer operational data, including measuring the current of each phase, calculating the percentage of load imbalance, analyzing copper losses, and evaluating efficiency and reliability indices. The optimization model is carried out by simulating load redistribution between phases using a mathematical approach to minimize current deviations from the average current. Evaluation parameters include reducing power losses, increasing transformer efficiency, and improving the value of the imbalance factor according to IEC and IEEE standards. The results show that before optimization, the level of load imbalance was in the moderate to high category, which resulted in increased power losses and increased operating temperatures. After the load balancing optimization process, there was a significant decrease in the percentage of imbalance, a decrease in power losses, and an increase in transformer efficiency. Furthermore, the estimated insulation life shows an improvement due to reduced thermal stress. This study demonstrates that a systematic, data-driven three-phase load balancing optimization strategy can sustainably improve the performance, efficiency, and reliability of power transformers. The proposed model can be implemented as part of an asset management and preventive maintenance strategy in electric power systems.

Keywords


load unbalance; optimization; transformer efficiency; power losses; power system reliability

Full Text:

PDF

References


AR Bergen., & Vittal Kumar. (2000). Power Systems Analysis (2nd ed.). Upper Saddle River: Prentice Hall.

Aryza S et al, (2024). A ROBUST OPTIMIZATION TO DYNAMIC SUPPLIER DECISIONS AND SUPPLY ALLOCATION PROBLEMS IN THE MULTI-RETAIL INDUSTRY. Eastern-European Journal of Enterprise Technologies, 129(3).

Chapman, S. J. (2012). Electric machinery fundamentals (5th ed.). McGraw-Hill.

Gonen, T. (2014). Electric power distribution systems engineering (3rd ed.). CRC Press.

Grainger, J. J., & Stevenson, W. D. (1994). Power system analysis. McGraw-Hill.

Hadi Saadat. (2010). Power Systems Analysis (3rd ed.). New York: McGraw-Hill.

H,Satria, Mungkin, M., Dayana, I., Ramdan, D., & Maizana, D. (2024). Development of energy conversion and lightning strike protection simulation for photovoltaic-wind turbine on grid. International Journal of Electrical & Computer Engineering (2088-8708), 14(1).

IEC. (2018). Power transformers – Part 1: General (IEC 60076-1). International Electrotechnical Commission.

IEEE. (2018). IEEE Guide for Transformer Loading. New York: IEEE.

IEEE. (2011). IEEE guide for loading mineral-oil-immersed transformers and step-voltage regulators (IEEE Std C57.91-2011). Institute of Electrical and Electronics Engineers.

IEEE. (2019). IEEE Standard for Power System Voltage Regulation and Reactive Power Compensation. New York: IEEE.

International Electrotechnical Commission. (2018). IEC 60076-1 Power Transformers – General. Geneva: IEC.

International Electrotechnical Commission. (2019). IEC 61000-4-30 Power Quality Measurement Methods. Geneva: IEC.

John J. Grainger., & William D. Stevenson Jr.. (2003). Power System Analysis. New York: McGraw-Hill.

J. Duncan Glover., Mulukutla S. Sarma., & Thomas Overbye. (2017). Power System Analysis and Design (6th ed.). Boston: Cengage Learning.

Mungkin, M., & Satria, H. (2023). Desain Sistem Panel Surya Fleksibel dengan Penambahan Reflektor Cermin untuk Peningkatan Output Konversi Energi Listrik.

PT PLN (Persero). (2022). Standard Operating Procedures for Substations and Electric Power Distribution Systems. Jakarta: PLN.

Short, T. A. (2014). Electric power distribution handbook (2nd ed.). CRC Press.

Theodore Wildi. (2006). Electrical Machines, Drives and Power Systems (6th ed.). Upper Saddle River, NJ: Pearson Education.




DOI: https://doi.org/10.30596/jcositte.v7i1.29561

Refbacks

  • There are currently no refbacks.