Pemodelan Inspeksi Kerusakan Ban Mobil Menggunakan Convolutional Neural Network (CNN)

Desmarita Leni; Halga Yermadona

doi:10.30596/rmme.v6i2.16198

Pemodelan Inspeksi Kerusakan Ban Mobil Menggunakan Convolutional Neural Network (CNN)

Desmarita Leni, Halga Yermadona

Abstract

Tire damage inspection can be categorized as part of vehicle maintenance with the aim of ensuring that the tire condition is in good condition. Visual inspection using human observation has limitations, making it not always accurate and can result in errors in determining tire suitability. This research designs a machine learning modeling using Convolutional Neural Network (CNN) to detect damage to mobile tires. The parameters used in the CNN model training are the Adam optimizer, learning rate 0.0001, batch size 16, and using the Early Stopping function. In this study, the CNN modeling was tested with two treatments, namely using a dataset without data augmentation and a dataset using data augmentation, then the results were evaluated using a confusion matrix. The results showed that data augmentation treatment can significantly improve model performance, with an increase in accuracy of 20%, precision of 14%, recall of 22%, and f1-score of 19% compared to treatment without data augmentation

Keywords

Inspection , Modeling, Data Augmentation, Convolutional Neural Network (CNN)

Full Text:

PDF

References

D. O. T. Hs, “Traffic Safety Facts 2017,” no. March, pp. 2008–2016, 2019.

Kementrian Perhubungan, “Peraturan Menteri Perhubungan Republik Indonesia Nomor 96 Tentang Pedoman Pelaksanaan Kegiatan Manajemen dan Rekayasa Lalu Lintas,” Jakarta. pp. 1–45, 2015.

L. Puspitasari, “Analisa Performance Ban Pada Unit Produksi Overburden Hd-785 Terhadap Produktivitas Tambang Batubara,” Kurvatek, vol. 5, no. 1, pp. 69–79, 2020, doi: 10.33579/krvtk.v5i1.1775.

G. Z. Chengjun Xu, “Intelligent manufacturing Lie Group Machine Learning: real-time and efficient inspection system based on fog computing,” J. Intell. Manuf., vol. 32, no. 1, pp. 237–249, 2021, [Online]. Available: https://link.springer.com/article/10.1007/s10845-020-01570-5

J. J. Seokju Oh, Jaegyeong Cha, Donghyun Kim, “Quality Inspection of Casting Product Using CAE and CNN,” Signal Process. Commun. (ICISPC), IEEE, no. . In 2020 4th International Conference on Imaging, pp. 34–38, 2020.

S. H. P. & J. Y. Thong Phi Nguyen, Seungho Choi, Sung-Jun Park, “Inspecting Method for Defective Casting Products with Convolutional Neural Network (CNN),” Int. J. Precis. Eng. Manuf. Technol., vol. 8, pp. 583–594, 2021, [Online]. Available: https://link.springer.com/article/10.1007/s40684-020-00197-4

M. Zhang, J. Wu, H. Lin, P. Yuan, and Y. Song, “The Application of One-Class Classifier Based on CNN in Image Defect Detection,” Procedia Comput. Sci., vol. 114, pp. 341–348, 2017, doi: 10.1016/j.procs.2017.09.040.

W.-H. A. & D.-J. K. Je-Kang Park, “Convolutional Neural Network Based Surface Inspection System for Non-patterned Welding Defects,” Int. J. Precis. Eng. Manuf. Vol., vol. 20, pp. 363–374, 2019, [Online]. Available: https://link.springer.com/article/10.1007/s12541-019-00074-4

A. S. and P. D. F. Sultana, “Advancements in Image Classification using Convolutional Neural Network,” 2018 Fourth Int. Conf. Res. Comput. Intell. Commun. Networks (ICRCICN), Kolkata, India, pp. 122–129, 2018, doi: 10.1109/ICRCICN.2018.8718718.

J. Sanjaya and M. Ayub, “Augmentasi Data Pengenalan Citra Mobil Menggunakan Pendekatan Random Crop, Rotate, dan Mixup,” J. Tek. Inform. dan Sist. Inf., vol. 6, no. 2, pp. 311–323, 2020, doi: 10.28932/jutisi.v6i2.2688.

R. Zhang et al., “Automatic Detection and Classification of Colorectal Polyps by Transferring Low-Level CNN Features From Nonmedical DomainAutomatic Detection and Classification of Colorectal Polyps by Transferring Low-Level CNN Features From Nonmedical Domain,” IEEE J. Biomed. Heal. Informatics, vol. 21, no. 1, pp. 41–47, doi: 10.1109/JBHI.2016.2635662.

H. Peng, J. Li, Y. Song, and Y. Liu, “Incrementally learning the hierarchical softmax function for neural language models,” 31st AAAI Conf. Artif. Intell. AAAI 2017, pp. 3267–3273, 2017, doi: 10.1609/aaai.v31i1.10994.

D. Leni, H. Yermadona, A. Usra Berli, R. Sumiati, and H. Haris, “Pemodelan Machine Learning untuk Memprediksi Tensile Strength Aluminium Menggunakan Algoritma Artificial Neural Network (ANN),” J. Surya Tek., vol. 10, no. 1, pp. 625–632, 2023, doi: 10.37859/jst.v10i1.4843.

D. Leni, “Pemilihan Algoritma Machine Learning Yang Optimal Untuk Prediksi Sifat Mekanik Aluminium,” J. Engine Energi, Manufaktur, dan Material., vol. 7, no. 1, pp. 35–44, 2023.

A. Nur Handayani, Muladi, I. Ari Elbaith Zaeni, W. Cahya Kurniawan and R. Andrie Asmara, “Development of e-Collab Classroom for CNN Practice on Electrical Engineering, Universitas Negeri Malang,” 2020 4th Int. Conf. Vocat. Educ. Train. (ICOVET), Malang, Indones., pp. 47–51, 2020, doi: 10.1109/ICOVET50258.2020.9230345.

P. Hernández-García, A., König, “Further Advantages of Data Augmentation on Convolutional Neural Networks.,” Kůrková, V., Manolopoulos, Y., Hammer, B., Iliadis, L., Maglogiannis, I. Artif. Neural Networks Mach. Learn. – ICANN 2018. ICANN 2018. Lect. Notes Comput. Sci., vol. 11139, pp. 95–103, 2018, doi: https://doi.org/10.1007/978-3-030-01418-6_10.

C. Khosla and B. S. Saini, “Enhancing Performance of Deep Learning Models with different Data Augmentation Techniques: A Survey,” 2020 Int. Conf. Intell. Eng. Manag. (ICIEM), London, UK, pp. 79–85, 2020, doi: 10.1109/ICIEM48762.2020.9160048.

J. Wang and L. Perez, “The Effectiveness of Data Augmentation in Image Classification using Deep Learning,” arXiv Prepr. arXiv, vol. 1712.04621, 2017.

DOI: https://doi.org/10.30596/rmme.v6i2.16198

Refbacks

There are currently no refbacks.

This work is licensed under a Creative Commons Attribution 3.0 License

Jurnal Rekayasa Material, Manufaktur dan Energi is abstracting & indexing in the following databases:

This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

Statcounter View My Stats RMME