Sintesis Dan Karakterisasi Nanopartikel Fe3o4/Tio2-Co Dengan Variasi Suhu Kalsinasi Dalam Mendegradasi Methylene Blue

Hilwa Salsabila Lubis, Ridwan Yusuf Lubis, Abdul Halim Daulay

Abstract


A study has been conducted on the effect of calcination temperature on the characteristics of Fe3O4/TiO2-Co nanoparticles for the degradation of Methylene Blue. The nanoparticles were synthesized using the coprecipitation method. The aim of this research was to investigate the influence of calcination temperature on the morphological structure, crystal size, and degradation percentage of Methylene Blue, with variations in calcination temperatures of 400, 500, and 600 °C. The samples were characterized using Scanning Electron Microscope (SEM), X-ray diffractometer (XRD), and UV-Vis Spectrophotometer. The SEM results indicated that at a calcination temperature of 400 °C, agglomeration still occurred. The XRD analysis showed that as the calcination temperature increased, the crystal size decreased, with the sizes for FTC400, FTC500, and FTC600 samples being 30.53 nm, 30.13 nm, and 28.74 nm, respectively. The UV-Vis test results revealed that the higher the calcination temperature, the higher the degradation percentage, reaching 99.40% for the FTC600 sample

Keywords


TiO2; Co; Fe3O4; Coprecipitation; Nanoparticles

Full Text:

PDF

References


P. O. Oladoye, T. O. Ajiboye, E. O. Omotola, dan O. J. Oyewola, “Methylene blue dye: Toxicity and potential elimination technology from wastewater,” Results in Engineering, vol. 16, hlm. 100678, Des 2022, doi: 10.1016/j.rineng.2022.100678.

M. A. Al-Nuaim, A. A. Alwasiti, dan Z. Y. Shnain, “The photocatalytic process in the treatment of polluted water,” 1 Februari 2023, Springer Science and Business Media Deutschland GmbH. doi: 10.1007/s11696-022-02468-7.

M. B. Tahir, M. Rafique, M. S. Rafique, N. Fatima, dan Z. Israr, “Metal oxide- and metal sulfide-based nanomaterials as photocatalysts,” dalam Nanotechnology and Photocatalysis for Environmental Applications, Elsevier, 2020, hlm. 77–96. doi: 10.1016/b978-0-12-821192-2.00006-1.

Pindobilowo, Dwi Ariani, dan Dewi Puspitasari, “Use of Nanoparticles as Materials to Prevent Dental and Oral Diseases,” Formosa Journal of Applied Sciences, vol. 3, no. 4, hlm. 2123–2134, Apr 2024, doi: 10.55927/fjas.v3i4.8795.

R. Hatefi, H. Younesi, A. Mashinchian-Moradi, dan S. Nojavan, “A facile decoration of anatase Fe3O4/TiO2 nanocomposite with graphene quantum dots: Synthesis, characterization, and photocatalytic activity,” Advanced Powder Technology, vol. 32, no. 7, hlm. 2410–2422, Jul 2021, doi: 10.1016/j.apt.2021.05.020.

A. D. Racovita, “Titanium Dioxide: Structure, Impact, and Toxicity,” 1 Mei 2022, MDPI. doi: 10.3390/ijerph19095681.

N. C. Horti, M. D. Kamatagi, N. R. Patil, S. K. Nataraj, M. S. Sannaikar, dan S. R. Inamdar, “Synthesis and photoluminescence properties of titanium oxide (TiO2) nanoparticles: Effect of calcination temperature,” Optik (Stuttg), vol. 194, Okt 2019, doi: 10.1016/j.ijleo.2019.163070.

S. Khammar, N. Bahramifar, dan H. Younesi, “Preparation and surface engineering of CM-β-CD functionalized Fe3O4@TiO2 nanoparticles for photocatalytic degradation of polychlorinated biphenyls (PCBs) from transformer oil,” J Hazard Mater, vol. 394, Jul 2020, doi: 10.1016/j.jhazmat.2020.122422.

E. Sri Kunarti, I. Kartini, A. Syoufian, dan K. M. Widyandari, “Synthesis and photoactivity of Fe3O4/TiO2-Co as a magnetically separable visible light responsive photocatalyst,” Indonesian Journal of Chemistry, vol. 18, no. 3, hlm. 403–410, Agu 2018, doi: 10.22146/ijc.26831.

A. H. Kianfar dan M. A. Arayesh, “Synthesis, characterization and investigation of photocatalytic and catalytic applications of Fe3O4/TiO2/CuO nanoparticles for degradation of MB and reduction of nitrophenols,” J Environ Chem Eng, vol. 8, no. 1, Feb 2020, doi: 10.1016/j.jece.2019.103640.

A. N. Chishti dkk., “Synthesis of silver doped Fe3O4/C nanoparticles and its catalytic activities for the degradation and reduction of methylene blue and 4-nitrophenol,” Appl Surf Sci, vol. 546, Apr 2021, doi: 10.1016/j.apsusc.2021.149070.

M. Ramadhan, A. R. Pradipta, dan E. S. Kunarti, “Synthesis of Fe3O4/TiO2-Co nanocomposite as model of photocatalyst with magnetic properties,” dalam Materials Science Forum, Trans Tech Publications Ltd, 2017, hlm. 14–19. doi: 10.4028/www.scientific.net/MSF.901.14.

K. Safeen dkk., “Structure phase-dependent dielectric and photodegradation properties of Co-doped TiO2 nanoparticles synthesized via co-precipitation route,” Journal of Saudi Chemical Society, vol. 27, no. 5, Sep 2023, doi: 10.1016/j.jscs.2023.101711.

S. Khoirunisa’ dan D. Ariswan, “STRUKTUR DAN KOMPOSISI KIMIA BAHAN SEMIKONDUKTOR LAPISAN TIPIS Sn(S 0,8 Te 0,2 ) HASIL PREPARASI DENGAN TEKNIK EVAPORASI VAKUM.” Jurnal Ilmu Fisika dan Terapannya, 2017, Vol. 6, no. 3, hlm. 173-183, doi: 10.21831/fisika%20-%20s1.v6i3.7465.

N. F. R. Tang, D. Tahir, dan H. Heryanto, “Sintesis Komposit ZnO/Ca3(PO4)2 menggunakan metode Sol-gel sebagai Material Fotokatalis Limbah Cair Industri (Metilen Biru),” Jurnal Fisika Flux: Jurnal Ilmiah Fisika FMIPA Universitas Lambung Mangkurat, vol. 19, no. 1, hlm. 31, Mar 2022, doi: 10.20527/flux.v19i1.11824.




DOI: https://doi.org/10.30596/rmme.v8i1.21755

Refbacks

  • There are currently no refbacks.




Creative Commons License

 This work is licensed under a Creative Commons Attribution 3.0 License

Jurnal Rekayasa Material, Manufaktur dan Energi  is abstracting & indexing in the following databases: 

  
 

Creative Commons License

This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

Statcounter View My Stats RMME