Analisis Sistem Pengkondisian Udara Pada Ruang Kerja Kantor PT. Sarku Enjinering Utama

Matsuani -, Suwaryo -

Abstract


Air conditioning in the workspace is something that workers need to provide comfort. Generally a comfortable condition (comfort condition) is an air condition where the temperature of the dry bulb is 24 C to 25 C and wet bulb is 18.3 C with relative humidity of 50% to 60%. The purpose of this study is to analyze the cooling requirements in the workspace which are then adjusted to the heat load in the room. In the calculation of the cooling load using the CLTD (Colling Load Temperature Difference) method. The final result is that the maximum cooling load at peak conditions is at 15:00 amounting to 14,152 kW = 182,941.99 BTU / h with an air requirement of 5,756 CFM, while the installed cooling capacity is 180,000 BTU / h resulting in a shortage of cooling load of 2,941, 99 BTU / h. With these deficiencies, additional air conditioning is needed as much as 2 units with each unit with a capacity of 1 PK / 9,000 BTU / h. Researchers recommend a cooling machine that is used to add capacity shortages, namely using a Split type AC cooler because it is considered more efficient and easy to install and maintain.


Keywords


Air conditioning;Ccooling capacity;CLTD

Full Text:

PDF

References


Wiranto Arismunandar, Buku Penyegaran udara, Koleksi Buku Perpustakaan Digital ITB, 1991

ASHRAE, Handbook of Air Conditioning Fundamental, ASHRAE, 2001.

V. V. Prathibha Bharathi, Ajay Kodliwad, Busi Ashok Kumar, V. V. Naga Deepthi. Design of Conditioning System for Residential/Office Building. 2017 [3].

Felix Uba,.Fiagbe Yesuenyeagbe., Sarsah Emmanuel. Simplified Procedure For Estimating Air-Conditioning Cooling Load In Ghana. 2015 [4].

Yonas Mitiku Degu. Cooling Load Estimation and Air Conditioning Unit Selection for Hibir Boat. The International Journal Of Engineering And Science (IJES). 2016

Sabaruddin, Perhitungan Ulang Beban Pendinginan Pada Ruang Auditorium Gedung Manggala Wanabakti Blok III Kementerian Kehutanan Jakarta. Mercu Buana Jakarta. Sinergi. 2014




DOI: https://doi.org/10.30596/rmme.v3i2.5271

Refbacks

  • There are currently no refbacks.




Creative Commons License

This work is licensed under a Creative Commons Attribution 3.0 License

Jurnal Rekayasa Material, Manufaktur dan Energi  is abstracting & indexing in the following databases: 

  
 

Creative Commons License

This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

Statcounter View My Stats RMME