Pengaruh Ketebalan Core Komposit Sandiwch Berpenguat Serat Pelepah Pisang-Kayu Jati untuk Aplikasi Partisi Peredam Suara pada Kamar Mesin Kapal

Rizal Indrawan, Sasti Prasaja

Abstract


Natural fiber composites are one of the innovative materials in an effort to solve the waste problem. Banana midrib and sawdust are plantation and forestry wastes whose utilization is very minimal. This research was conducted to make sandwich composites reinforced with banana midrib fiber and sawdust which is intended to be able to replace glasswool to reduce noise in the engine control room. The use of glasswool is not good for health which if the particles are inhaled it causes respiratory problems. The thickness of the core in the sandwich composite was varied by 2, 4, and 6 mm. Sound absorption testing is carried out according to the ASTM E1050-19 standard. The hand lay up method and polyester resin were used to make natural fiber sandwich composites. The highest sound absorption coefficient on specimens 2-35 is 0.77. All specimens of sandwich composites produced in this study met the requirements for sound absorption installations in buildings (ɑ = 0.15). Along with the addition of the volume fraction reinforced on the core gives a parabolic effect with the addition of 35% giving the best results at thicknesses of 2 and 6 mm. The thinner the core provides a better sound absorption coefficient than other thicknesses.


Keywords


Banana Midrib Fiber, Core Thickness, Sandwich Composite, Sound Absorbtion, Volume Fraction, Wood Powder

Full Text:

PDF

References


Ardiyanto, P. (2014). Analisa Pengaruh Ketebalan Inti (Core) Polyurethane Terhadap Karakteristik Bending Komposit Sandwich, Doctoral Dissertation, Institut Teknologi Sepuluh Nopember, Surabaya).

ASTM Standard E1050-90. (1998). Standard Test Method for Impedance and Absorption of Acoustical Materials Using a Tube. Two Mikrofons and a Digital Frequency Analysis System Annual Book of ASTM Standards, 904–909.

Gibson, R.F. (2016). Principles of Composite Material Mechanics (4th ed.). CRC Press. https://doi.org/10.1201/b19626

Hestiawan, H., & Jamasri, K. (2017). Pengaruh Penambahan Katalis Terhadap Sifat Mekanis Resin Poliester Tak Jenuh. Teknosia, 3(1), 1-7.

Hidayat, A., Yudo, H., & Manik, P. (2016). Analisa Teknis Komposit Sandwich Berpenguat Serat Daun Nanas Dengan Core Serbuk Gergaji Kayu Sengon Laut Ditinjau Dari Kekuatan Tekuk Dan Impak. Jurnal Teknik Perkapalan, 4(1).

Iksan, A. (2015). Delignifikasi Serbuk Kayu Jati Putih (Gmelina Arborea Roxb.) Menggunakan Fungi Phanerochaete Chrysosporium Yang Diradiasi Gamma, Bachelor's Thesis, Fakultas Sains dan Teknologi UIN Syarif Hidayatullah Jakarta.

ISO 11654 (1997). Acoustic –Sound Absorbers For Use In Building-Rating Of Sound Absorption.

Iwan, K. P., & Adi, W. H. (2018, December). Analisa Model Getaran Main Engine Pada Kapal. In Proceedings Conference on Marine Engineering and its Application Vol. 1, No. 1, pp. 31-36.

Kencanawati, C. I. P. K., Sugita, I. K. G., & Priambadi, I. G. N. (2016). Analisis Koefisien Absorpsi Bunyi Pada Komposit Penguat Serat Alam Dengan Menggunakan Alat Uji Tabung Impedansi 2 Microphone. Jurnal Energi dan Manufaktur, Vol, 9(1), 105-108.

Krisdianto, A., Wijianto, S. T., Eng, M., & Pramuko, I. P. (2016). Karakteristik Komposit Serbuk Kayu Jati dengan Fraksi Volume 25%, 30%, 35% Terhadap Uji Bending, Uji Tarik dan Daya Serap Bunyi untuk Dinding Peredam Suara, Doctoral Dissertation, Universitas Muhammadiyah Surakarta, Surakarta.

Nugroho, G. Estu (2017). Karakteristik Komposit Berpenguat Serat Tandan Kosong Kelapa Sawit Menggunakan NaOH dengan Fraksi Volume 4%, 6%, 8%, Skripsi, Universitas Sanata Dharma Yogyakarta.

Sinarep, S., Catur, A. D., & Hafidzul, M. (2014). Redaman Suara Pada Komposit Sandwich Polyester Berpenguat Serat Sisal Dengan Core Styrofoam. Dinamika Teknik Mesin, 4(1), 30-37.

Suherman, N. (2020). Koefisien Penyerapan Bunyi Bahan Akustik dari Pelepah Pisang dengan Variasi Ukuran Serat, Doctoral Dissertation, Universitas Islam Negeri Alauddin, Makassar).




DOI: https://doi.org/10.30596/rmme.v6i1.13676

Refbacks

  • There are currently no refbacks.


Creative Commons License

This work is licensed under a Creative Commons Attribution 3.0 License

Jurnal Rekayasa Material, Manufaktur dan Energi  is abstracting & indexing in the following databases: 

 

Creative Commons License

This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

Statcounter View My Stats RMME