Potensi Penambahan Serat Alumina dalam Kaca Optik sebagai Doping untuk Aplikasi Light Detection and Ranging (LIDAR)
Abstract
The optical glass used in LiDAR applications requires specific characteristics, including high strength and low porosity, to achieve optimal performance. One promising approach is the incorporation of alumina fibers as a reinforcement in the optical glass matrix. This research investigates the potential of alumina fibers in enhancing strength and reducing porosity in optical glass used in LiDAR applications. Alumina fibers are introduced into the optical glass matrix through a precise manufacturing process. The results of mechanical testing indicate that the addition of alumina fibers significantly increases the strength of the optical glass, making it more resistant to mechanical pressure that may occur during the use of LiDAR in challenging environments.
Keywords
References
Sukma, Hendri, Rini Prasetyani, Dwi Rahmalina, and Rizal Imanuddin. 2015. “Terhadap Kekerasan Material Komposit Matriks.” (November): 1–13.
Hsu, Ching-Pai et al. 2020. “A Review and Perspective on Optical Phased Array for Automotive LiDAR.” IEEE Journal of Selected Topics in Quantum Electronics 27(1): 1–16.
Wang, Ji. 2014. “Alumina as a Dopant in Optical Fiber by OVD.” Applied Physics A: Materials Science and Processing 116(2): 505–18.
,[5] Suarsana, Ketut. 2016. “Pemanfaatan Serat Silicon Carbon Dan Partikel Alumina Pada Matrik Aluminium Untuk Meningkatkan Sifat Mekanis Material Komposit.” Jurnal Energi dan Manufaktur 9(2): 193–98. http://ojs.unud.ac.id/index.php/jem
Cheng, Jiping, Dinesh Agrawal, Yunjin Zhang, and Rustum Roy. 2002. “Microwave Sintering of Transparent Alumina.” Materials Letters 56(4): 587–92.
Azad, Abdul Majeed. 2006. “Fabrication of Transparent Alumina (Al2O3) Nanofibers by Electrospinning.” Materials Science and Engineering: A 435–436: 468–73.
Dhonge, Baban P. et al. 2011. “Spray Pyrolytic Deposition of Transparent Aluminum Oxide (Al 2 O 3 ) Films.” Applied Surface Science 258(3): 1091–96.
Ashurov, Matin, Vladimir Gorelik, Kirill Napolskii, and Sergey Klimonsky. 2020. “Anodic Alumina Photonic Crystals as Refractive Index Sensors for Controlling the Composition of Liquid Mixtures.” Photonic Sensors 10(2): 147–54.
DOI: https://doi.org/10.30596/rmme.v7i2.17345
Refbacks
- There are currently no refbacks.
This work is licensed under a Creative Commons Attribution 3.0 License
Jurnal Rekayasa Material, Manufaktur dan Energi is abstracting & indexing in the following databases:
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
Statcounter View My Stats RMME