Perbandingan Kinerja Mesin Pengering Tanpa dan dengan Menggunakan Dessiccant Pada Pengujian Tanpa Beban
Abstract
This study discusses drying process with and without using a desiccant. Conventionally, drying can be done directly (open drying). The weakness of open drying is the risk of exposing the dried material to dust and bacteria. This problem can be overcome by drying indirectly by paying attention to the temperature and humidity factors in the drying machine. Humidity during the drying process is a factor that influences how quickly the drying process occurs. What can be used to reduce the humidity level in the air is to provide a desiccant to reduce the water vapor level during the drying proces. The aim of this study is to test the drying cabinet with and without using desiccant to determine the performance of the drying cabinet during the drying process. The method used in this research was to carry out experimental testing. The result saw that there was effect of using desiccant. It reduced the humidity of drying room and improve the performance of drying rate.
References
N. Divyangkumar, S. Jain, and N. L. . Panwar, “Influences of latent heat storage heat sink integrated with solar dryer to enhance drying period,” Energy Nexus, vol. 8, no. September, p. 100160, 2022, doi: 10.1016/j.nexus.2022.100160.
Q. Tu, Z. Ma, and H. . Wang, “Investigation of wet particle drying process in a fluidized bed dryer by CFD simulation and experimental measurement,” Chem. Eng. J., vol. 452, no. P2, p. 139200, 2023, doi: 10.1016/j.cej.2022.139200.
S. Gunawan, B. M. T. Pakpahan, D. M. Yulanto, L. Atika, and S. . Januariyansah, “Performance Analysis of Indirect Clothes Dryer Using Solar Photovoltaic Energy,” 2022, doi: 10.4108/eai.11-10-2022.2325470.
S. Gunawan, H. Hasan, and R. D. W. Lubis, “Pemanfaatan Adsorben dari Tongkol Jagung sebagai Karbon Aktif untuk Mengurangi Emisi Gas Buang Kendaraan Bermotor,” J. Rekayasa Mater. Manufaktur dan Energi, vol. 3, no. 1, pp. 38–47, 2020, doi: 10.30596/rmme.v3i1.4527.
Abdul Kodir, Acara 3 ELEMEN PEMANAS. scribd, 2014.
J. J. Michael, I. S, and R. Goic, “Flat plate solar photovoltaic-thermal (PV/T) systems: A reference guide,” Renew. Sustain. Energy Rev., vol. 51, pp. 62–88, 2015, doi: 10.1016/j.rser.2015.06.022.
D. Morfi, H. Ambarita, and F. H. Napitupulu, “Optimasi Pengering Pakaian Sistem Pompa Kalor dengan Penambahan Alat Penukar Kalor TALENTA Conference Series Optimasi Pengering Pakaian Sistem Pompa Kalor dengan Penambahan Alat Penukar Kalor,” vol. 1, no. 1, 2018.
S. O. Amiebenomo, I. I. Omorodion, and J. O. Igbinoba, “Prototype Design and Performance Analysis of Solar Clothes Dryer,” vol. 2, no. 1, pp. 35–43, 2013.
M. S. A. Ramli et al., “Review of desiccant in the drying and air-conditioning application,” Int. J. Heat Technol., vol. 39, no. 5, pp. 1475–1482, 2021, doi: 10.18280/ijht.390509.
S. Wang, R. Tu, and Q. . Zhang, “Dynamic performance analyses and optimization studies on air dehumidifiers using multi-stage desiccant plates,” Appl. Therm. Eng., vol. 212, no. November 2021, p. 118546, 2022, doi: 10.1016/j.applthermaleng.2022.118546.
R. P. Singh, R. K. Das, and N. Upadhyay, “Effectiveness approach for predicting desiccant wheel performance: correlation utilizing experimental results,” Int. J. Refrig., vol. 156, pp. 84–91, 2023, doi: 10.1016/j.ijrefrig.2022.11.016.
D. Sudirman Lubis, “FT-UMSU Jurnal Rekayasa Material , Manufaktur dan Energi FT-UMSU,” J. Rekayasa Mater. , Manufaktur dan Energi FT-UMSU, vol. 4, no. 1, pp. 64–72, 2021.
D. Khairul Umurani, “FT-UMSU Jurnal Rekayasa Material , Manufaktur dan Energi FT-UMSU,” J. Rekayasa Mater. , Manufaktur dan Energi FT-UMSU, vol. 6, no. 1, pp. 89–98, 2023.
M. Bhowmik, S. Rath, R. Jayson Varela, P. Muthukumar, R. Anandalakshmi, and K. Saito, “Performance assessment of integrated liquid desiccant dehumidification with vapor-compression system for energy-efficient air conditioning applications,” Appl. Therm. Eng., vol. 216, no. July, p. 119118, 2022, doi: 10.1016/j.applthermaleng.2022.119118.
P. K. S. Tejes, G. Priyadarshi, and B. Kiran Naik, “Performance characteristics assessment of hollow fiber membrane-based liquid desiccant dehumidifier for drying application,” Appl. Therm. Eng., vol. 218, no. September 2022, 2023, doi: 10.1016/j.applthermaleng.2022.119311.
M. Bhowmik, K. Gohain, P. Muthukumar, and K. Saito, “Steady-state performance assessment and geometrical optimization of packed-bed liquid desiccant air dehumidification systems,” Therm. Sci. Eng. Prog., vol. 38, no. September 2022, 2023, doi: 10.1016/j.tsep.2022.101626.
M. Dorouzi, H. Mortezapour, H. R. Akhavan, and A. G. Moghaddam, “Tomato slices drying in a liquid desiccant-assisted solar dryer coupled with a photovoltaic-thermal regeneration system,” Sol. Energy, vol. 162, no. January, pp. 364–371, 2018, doi: 10.1016/j.solener.2018.01.025.
V. R. Mugi, M. C. Gilago, and V. P. . Chandramohan, “Energy and exergy investigation of indirect solar dryer under natural and forced convection while drying muskmelon slices,” Energy Nexus, vol. 8, no. October, p. 100153, 2022, doi: 10.1016/j.nexus.2022.100153.
L. Qingdao Bozewon International Trade Co., “Desiccant Putih Silica Gel dengan Ukuran 3-5Mm,” Alibaba.com, 2022. https://indonesian.alibaba.com/product-detail/desiccant-white-silica-gel-With-Size-60665601237.html.
H. Ghadamian and H. Salarian, “Application of Desiccant in Modern Air Conditioning Systems Application of Desiccant in Modern Air Conditioning Systems,” no. October 2014, 2009.
R. P. Singha and R. K. Das , V K Mishra, “Desiccant materials for air conditioning applications - A review w Desiccant materials for air conditioning applications - A revie,” IOP Conf. Ser. Mater. Sci. Eng., 2018, doi: 10.1088/1757-899X/404/1/012005.
DOI: https://doi.org/10.30596/rmme.v7i2.17834
Refbacks
- There are currently no refbacks.
This work is licensed under a Creative Commons Attribution 3.0 License
Jurnal Rekayasa Material, Manufaktur dan Energi is abstracting & indexing in the following databases:
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
Statcounter View My Stats RMME