Pemanfaatan Limbah Pertanian Di Indonesia Sebagai Biomaterial Nitroselulosa Untuk Propelan Guna Mendukung Industri Amunisi
Abstract
Propellant production is one of the priority programs in the development of the Indonesia defense industry. One of the main components in double-base propellant is nitrocellulose, which currently relies on imports. With the increasing demand for nitrocellulose, it is crucial for Indonesia to achieve self-sufficiency in its production to support the defense industry. This study aims to identify the potential of agricultural waste as a raw material source for nitrocellulose. The method used is a literature review (meta-analysis) of various references discussing agricultural waste that has the potential to produce nitrocellulose. The results show that several agricultural wastes, such as sago fiber waste, commercial pulp, ramie fiber, Water Hyacinth, and beema bamboo have high cellulose content and potential to be used as raw materials for nitrocellulose. Further research is needed to maximize the nitrocellulose yield from agricultural waste, thus supporting self-sufficiency in propellant production in Indonesia.
Keywords
Full Text:
PDFReferences
H. Y. Irwanto, L. Mariani, and A. Sarjito, “Jurnal Lembaga Ketahanan Nasional Republik Indonesia Evaluasi Industri Pertahanan dalam rangka Kemandirian Alutsista dengan Bercemin pada Industri Pertahanan Negara Maju,” Jurnal Lembaga Ketahanan Nasional Republik Indonesia Evaluasi Industri Pertahanan dalam rangka Kemandirian Alutsista dengan Bercemin pada Industri Pertahanan Negara Maju, vol. 1, no 1, 2022.
F. Virgiawan Ramadhan, “STRATEGI INDUSTRI PERTAHANAN INDONESIA GUNA MENCAPAI KEMANDIRIAN INDUSTRI PERTAHANAN,” 2022. [Online]. Available: www.kemhan.go.id/itjen/2013/01/02/undangundang-republik-indonesia-nomor-16-tahun-
D. Firmansyah, S. Pasim Sukabumi, and S. Al Fath Sukabumi, “Teknik Pengambilan Sampel Umum dalam Metodologi Penelitian: Literature Review,” Jurnal Ilmiah Pendidikan Holistik (JIPH), vol. 1, no. 2, pp. 85–114, doi: 10.55927.
Y. A. Sudarso et al., “Sintesis Nitroselulosa dari Limbah Sabut Siwalan (Borassus Flabellifer) Sebagai Bahan Baku Propelan,” 2022. [Online]. Available: www.chempro.upnjatim.ac.id
S. Mahendra Wijaya, A. Badra Pitaloka, and A. H. Saputra, “Sintesis dan Karakterisasi Carboxymethyl Cellulose (CMC) dari Selulosa Eceng Gondok (Eichhornia crassipes) dengan Media Reaksi Isopropanol Etanol.”
A. Halim, A. Setiawan, A. Andriyanto, and S. Bachtiar, “PEMANFAATAN SELULOSA ECENG GONDOK (Eichhornia crassipes) SEBAGAI BAHAN DASAR PEMBUATAN NITROSELULOSA,” 2021.
F. T. Seta, S. Sugesty, and T. Kardiansyah, “PEMBUATAN NITROSELULOSA DARI BERBAGAI PULP LARUT KOMERSIAL SEBAGAI BAHAN BAKU PROPELAN,” JURNAL SELULOSA, vol. 4, no. 02, Nov. 2014, doi: 10.25269/jsel.v4i02.85.
R. Putri, R. Junaidi, and M. Mustain, “Pemanfaatan A-Selulosa Fiber Cake Kelapa Sawit Sebagai Alternatif Bahan Baku Nitroselulosa,” Jurnal Pendidikan dan Teknologi Indonesia, vol. 1, no. 9, pp. 351–356, Sep. 2021, doi: 10.52436/1.jpti.83.
T. E. Siahaya, M. Sahureka, and D. Seite, “Analisis Produksi Sagu (Studi Kasus di Desa Hatunuru Kecamatan Taniwel Timur Kabupaten Seram Bagian Barat) Economic Value Analysis of Sago Production (Case Study in Hatunuru Village, East Taniwel District, West Seram Regency),” Print) MAKILA:Jurnal Penelitian Kehutanan, vol. 15, no. 1, pp. 58–69, doi: 10.30598/makila.v15i1.
J. Teknik Lingkungan and F. Sains dan Terapan, “Optimasi Proses Nitrasi pada Pembuatan Nitro Selulosa dari Serat Limbah Industri Sagu,” 2010.
A. S. Mulyawan et al., “IDENTIFIKASI SIFAT FISIK DAN SIFAT TERMAL SERAT-SERAT SELULOSA UNTUK PEMBUATAN KOMPOSIT IDENTIFICATION OF PHYSICAL AND THERMAL PROPERTIES OF CELLULOSIC FIBERS FOR SYNTHESIS OF COMPOSITE.”
R. Rizkiah, K. Kencanawati, A. Rosidin, and L. Wibowo, “Sintesis Nitroselulosa Dari Serat Rami (Boechmerianivea) Menggunakan Trietilamin Systhesis Nitrocellulose From Hempen Using Triethyleamin (Boechmerianivea),” Jurnal Sains dan Teknik, vol. 3, no. 1, 2021, [Online]. Available: http://ejournal.uicm-unbar.ac.id/index.php/sainteks/
W. B. Kusumaningrum, R. Rochmadi, and S. Subyakto, “PEMBUATAN SELULOSA TERASETILASI DARI PULP BAMBU BETUNG (Dendrocalamus asper) SERTA PENGARUHNYA TERHADAP SIFAT MEKANIS BIOKOMPOSIT POLIPROPILENA,” Reaktor, vol. 17, no. 1, p. 25, May 2017, doi: 10.14710/reaktor.17.1.25-35.
A.- Rifai and E. R. Finalis, “Towards The Independence of The Propellant Industry for Munitions and Rocket,” JMPM (Jurnal Material dan Proses Manufaktur), vol. 6, no. 2, pp. 54–61, Dec. 2022, doi: 10.18196/jmpm.v6i2.15881.
F. T. Seta, S. Sugesty, and R. Biantoro, “Karakterisasi Nitroselulosa dari Pulp Larut Bambu Beema dan Bambu Industri,” JURNAL SELULOSA, vol. 9, no. 01, p. 25, Jun. 2019, doi: 10.25269/jsel.v9i01.241.
DOI: https://doi.org/10.30596/rmme.v8i2.22774
Refbacks
- There are currently no refbacks.
This work is licensed under a Creative Commons Attribution 3.0 License
Jurnal Rekayasa Material, Manufaktur dan Energi is abstracting & indexing in the following databases:
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
Statcounter View My Stats RMME