Desain Perancangan Mesin Pemotong Kentang Multifungsi
Abstract
We often encounter potatoes in eating places and restaurants that have been made into ready-to-eat food because they are easy to process into various kinds of food, one of which is french fries. The aim of this research is to produce a design for a multifunctional potato cutting machine that is efficient and portable. The concept refers to the design process of designing a machine by determining the dimensions, size and constituent components displayed on the working drawings. The results of this multifunctional potato cutting machine design resulted in the design of machine components such as a potato funnel hopper with dimensions of 300 mm x 80 mm x 222 mm, a potato pusher with dimensions of 80 mm x 114 mm, and the main frame of the machine with dimensions of 421 mm x 300 mm x 380 mm. Three variations of cutting knives consisting of flat, long/stick-shaped and soft-shaped cutting knives. The knife driver used is an electric motor with a power of 125 watts, blade rotation speed of 700 rpm, and another drive transmission. Overall, the results of this design produce a design drawing for a potato cutting machine with dimensions of 421 mm x 300 mm x 544 mm, so that this machine is more efficient and portable.
Keywords
Full Text:
PDFReferences
N. Waluyo Utomo and A. Mahendra Sakti, “Mesin Pengupas Dan Pemotong Kentang Semi Otomatis Analisis Mesin Pengupas Dan Pemotong Kentang Semi Otomatis.”,2015.
K. T. Hendro Sefteven Hutahea, Dendi Rivan Girsang, Enzo W.B Siahaan, “Rancang Bangun Mesin Pengupas Dan Pemotong Kentang Stik Dengan Kapasitas 3 Kg/Proses Semi Otomatis,” 2022.
I. Ismadi, K. Annisa, L. Nazirah, N. Nilahayati, and M. Maisura, “Karakterisasi Morfologi Dan Hasil Tanaman Kentang Varietas Granola Dan Kentang Merah Yang Dibudidayakan Di Bener Meriah Provinsi Aceh,” J. Agrium, vol. 18, no. 1, pp. 63–71, 2021, doi: 10.29103/agrium.v18i1.3844.
E. Irwan, S. Wijianti, Y. Setiawan, D. Balunijuk, K. Merawang, and K. Bangka, “Rancang Bangun Mesin Pemotong Kentang Berbentuk Stick,” J. Tek. Mesin, vol. 7, no. 1, 2021.
N. Rezky Alfino, “JTEV (Jurnal Teknik Elektro Dan Vokasional) Rancang Bangun Alat Pemotong Kentang Berbentuk Stick Berbasis Mikrokontroller ATMega 328”, [Online]. Available: http://ejournal.unp.ac.id/index.php/jtev/index, 2020.
R. Nur, A. Kurniawan, D. Romahadi, and M. Fitri, “Implementasi Metode Elemen Hingga Menggunakan Solidworks untuk Mengoptimalkan Desain Pelek Depan Sepeda Motor Tipe Casting Wheel,” J. Tek. Mesin, vol. 12, no. 2, p. 96, 2023.
H. Istiqlaliyah, “Perancangan Rangka Mesin Pembuat Keripik Umbi Dengan Aplikasi Sistem Pneumatik,” J. Mesin Nusant., vol. 3, no. 2, pp. 112–121, 2021, doi: 10.29407/jmn.v3i2.15575.
S. Gumilar et al., “Analisis Laju Aliran Dan Kekuatan Magnetic Trap Pada Hopper Mesin,” J. Tek. Mesin, vol. 11, no. 1, pp. 48–55, 2023.
B. A. J. V. Oscar Andrian Yohanes, “Vol 5, 2023,” IMDeC, vol. 5, no. Automatic French Fries Cutter, p. 5, 2023.
L. Siregar, R. Silaen, and J. L. Hutabarat, “Pengaruh Perubahan Beban Terhadap Putaran dan Daya Masuk Motor Induksi Tiga Fasa (Aplikasi Pada Laboratorium Konversi Energi Listrik FT-UHN),” J. ELPOTECS, vol. 4, no. 1, pp. 1–15, 2021, doi: 10.51622/elpotecs.v4i1.446.
E. S. Johannes Fikki Fernando Damanik, Riris Debora Hutasoit, Lampita Deniska Sitorus, “Jurnal Ilmiah Wahana Pendidikan,” J. Ilm. Wahana Pendidik. https//jurnal.unibrah.ac.id/index.php/JIWP, vol. 8, no. 3, pp. 178–183, 2022, doi: 10.5281/zenodo.6604957.
A. Rahman, “Prototype Screw Conveyor Mesin Pendaur Ulang Pasir Cetak 10 Ton/Jam,” Screw Conveyor, no. November, pp. 1–2, 2017.
Wibowo Dedi Setyo, “Analisa Efisiensi dan Kinerja Motor Listrik 3 Fasa Sebagai Pompa Penyaluran Bahan Bakar Minyak Pertamina Patra Niaga,” 2022.
N. E. dan H. Hibatullah, Dimas, Muhammad Iqbal, “Mesin Pemotong Kentang,” Pros. Semin. Nas. Tek. Mesin Politek. Negeri Jakarta, no. Analisa Perhitungan Rancang Simulasi Mesin Pemotong Kentang, pp. 922–931, 2021, [Online]. Available: https://www.maksindo.com/mesin-pemotong-kentang-2
R. F. A. Wildan, “Perencanaan Dan Perhitungan Transmisi Pada Mesin Pengaduk Tipe Horizontal Berkapasitas 60 Kg/Jam,” Tugas Akhir-TM095502, 2016.
DOI: https://doi.org/10.30596/rmme.v8i2.23876
Refbacks
- There are currently no refbacks.
This work is licensed under a Creative Commons Attribution 3.0 License
Jurnal Rekayasa Material, Manufaktur dan Energi is abstracting & indexing in the following databases:
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
Statcounter View My Stats RMME