Karakterisasi Impedansi Polimer Komposit Dengan Filler Karbon Aktif Cangkang Kelapa Sawit Sebagai Absorber Material

Golfrid Gultom, Diman Raymond S. Tambunan, Dejoi Irfian Situngkir

Abstract


Tujuan penelitian ini adalah untuk mengetahui nilai impedansi poliuretan komposit dengan filler karbon aktif cangkang kelapa sawit sebagai dasar untuk mengetahui sifat absorber material dan membuat bahan polimer komposit dengan filler karbon aktif cangkang kelapa sawit sebagai material anti interferensi gelombang elektromagnetik pada frekuensi 10-12 GHz. Metode yang digunakan dalam penelitian ini adalah dengan melakukan fabrikasi material serapan gelombang mikro dengan menggunakan campuran karbon aktif cangkang kelapa sawit dan poliuretan sebagai matriks, kemudian melakukan karakterisasi poliuretan komposit, karakterisasi material meliputi karakterisasi fisik, karakterisasi impedansi dan karakterisasi serapan gelombang mikro. Hasil pengujian menunjukkan dengan persentase filler karbon aktif cangkang kelapa sawit sebesar 30% wt memiliki karakteristik reflection loss sebesar -13,33 dB pada frekuensi 10,9 GHz dengan bandwidth serapan gelombang < -10 dB adalah 0,76 GHz, dan memiliki impedansi rata-rata yang paling mendekati impedansi udara bebas sebesar 246,046 ohm yang dimiliki oleh poliuretan komposit dengan perbandingan poliuretan : filler karbon aktif cangkang kelapa sawit == (70% : 30%) wt.


Keywords


Kata Kunci : Impedansi, karbon aktif cangkang kelapa sawit, absorber.

Full Text:

PDF

References


Yuping Wu et. al, Effect of Doping SiO2 on High-Frequency Magnetic Properties for W-Type Barium Ferrite, Journal of Applied Physics, Volume 95, No. 8, April 2004

Abbas et.al, Complex permittivity and microwave absorption of a composite dielectric absorber Elsevier Composites, 2006

Abbas et.al, Complex permittivity,complex permeability and microwave absorption properties of ferrite-polymer composites, Journal of Magnetism and Magnetic Materials, 2007

Esfahani et.al, Preparation and Characterization of Foamed Polyurethane/Silicone Rubber/Graphite Nanocomposite as Radio Frequency Wave Absorbing Material:The Role of Interfacial Compatibilization Composites Science Technology, 2012

F.Qin and C. Brosseau, A review and analysis of microwave absorption in polymer composites filled with carbonaceous particles Journal of Applied Physics, 2012

Hosseini and Asadnia, Synthesis, characterization and microwave-absorbing properties of polypyrrole/MnFe2O4 nanocomposite Journal of Nanomaterials Volume 2012

Gairola et al, Modified composition of barium ferrite to act as a microwave absorber in X-band frequencies Solid state communications, 2009

Folgueras et.al, Microwave Absorbing Paints And Sheets Based On Carbonyl Iron And Polyaniline : Measurement and Simulation on Their Properties, Journal on Aerospacew Technology and Management, April 2010

Vinayasree et.al, Flexible microwave absorbers based on barium hexaferrite, carbon black, and nitrile rubber for 212 GHz applications Journal of Applied Physics, 2014




DOI: https://doi.org/10.30596/rmme.v2i1.3064

Refbacks

  • There are currently no refbacks.


Creative Commons License

This work is licensed under a Creative Commons Attribution 3.0 License

Jurnal Rekayasa Material, Manufaktur dan Energi  is abstracting & indexing in the following databases: 

 

Creative Commons License

This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

Statcounter View My Stats RMME